Make sure you have installed a hard drive in the relevant slot, connected the power supply and USB cables, and then switch the unit ON. It seems to be operating fine with this docking station. Installing the Hard Drive. Very gently align the drive to mate with the sockets on the dock station, and then apply a small amount of force so that. Multi Function Hdd Docking Model 893u2is Manual System While totally unfamiliar with that device. Hard drives take lots of power and cards do not. Does this unit have some sort of external power supply or secondary USB connection to the PC for more power?
Front of the dock. Make sure that the SATA connectors on the hard drive are facing the same corner of the drive bay that has the 2.5in cutout in the door. The label on the hard drive should face the front of the hard drive dock. If using a 3.5in IDE hard drive, connect the included 40-pin IDE ribbon cable to the. This video discribes a hard disk cloning device.These are the drivers for the Multi-function HDD Docking at https://drive.google.com/file/d/0B0yKBWJhp1trdkhy. Hard Drive Eraser (Single Pass Overwrite) WARNING! Any Data remaining on either connected hard drive will be deleted. NOTE: When using erase function source port is also an erase port. Press and hold the Erase button for 3 seconds on the back of the SATDOCK2REU3. HDD1The dock will check the drive then start the Hard Drive Erase process.
You are not required to install a driver, unless your computer operating system is Windows 2000 or earlier.
Make sure you have installed a hard drive in the relevant slot, connected the power supply and USB cables, and then switch the unit ON. Usually, the computer automatically detects a mass storage device connected to the USB port and loads the necessary drivers.
Multi Function Hdd Docking Model 893u2is Manual Transmission
There is an accompanying CD with software, which is required only if you wish to use the one touch backup and cloning functionality. You do not need to install the software in this CD, if all you will be doing is accessing the drive as a mass storage device.
As you can see, the printed circuit board (PCB) has plug connectors for the IDE and power ports, which mate with their respective counterpart connectors on the hard disk. It is therefore a simple matter of aligning the drive and plugging it in. Click on the image above to see exactly where a PC hard disk would connect.
Power Connectors
Turn over the hard drive so that the Molex power connectors on the drive and the dock station are on the same side.
Multi Function Hdd Docking Model 893u2is Manual PdfDesktop Hard Disk Position
A desktop hard disk such as PATA will connect in the centre.
If the power connectors align and mate properly, then the IDE connector will follow and align as well. The docking station connector usually ignores the pins for the jumper settings and they do not connect to anything.
Maxtor DiamondMax 21
I am using the Maxtor DiamondMax 21 hard drive, which also came from eBay as a refurbished drive. It seems to be operating fine with this docking station.
Installing the Hard Drive
Very gently align the drive to mate with the sockets on the dock station, and then apply a small amount of force so that the connectors join and make an electrical connection.
Connecting the Wires
After seating the drive into the dock station, connect the power supply and USB cables, and switch ON the dock station. When you switch it ON, your computer will automatically detect the device connected to the USB port and install the necessary drivers. In 'My Computer', you should see a 'Removable Drive' icon.
This Article Continues..All in One HDD DockingAll in One HDD Docking Drivers All in One HDD Docking Station How to Use Instructions All in One HDD Docking IDE Not Working Multi Function Hdd Docking Model 893u2is Manual DiagramMulti-function Hdd Docking Wlx-893u2is ManualNo Drives ShowingIDE / SATA Docking Box and Packaging IDE / SATA Docking Station Adapter Power Supply Inside Look Multi-function Hdd Docking 893u2is ManualComments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |